1. Turn on the power in turn. If you need to heat, please set the temperature and observe whether the heating is normal. For example, if the water is cooled, please open the water inlet and outlet valves for normal water flow.
2. Clean the mixing chamber, do not use any hard objects such as iron wires to remain, check the oil level and lubrication state of each gear oil, engine oil and butter, pay special attention to the oil level of the triple oil cup should not be less than half, and regularly Observe the change of the oil level of the triplet. It is abnormal that there is no oil consumption or too fast oil consumption (the knob of the triplet needs to be adjusted). The gear oil of the new machine should be replaced at least half a year, and the active parts should be added at least once a week. Do not exceed half of the oil mirror when refueling, otherwise oil leakage will occur.
3. Prepare the material, turn on the power supply and air pressure, raise the pressure cover to the upper limit position, then start the main motor, put in the prepared material after the main motor starts for half a minute, and then press down the pressure cover to carry out the material. secret refining.
4. If you need to change the color, please pour in the cleaning material or raw material cleaning agent, and then use a broom or iron wire to clean the old material in the rotor shaft gap in the mixing chamber.
5. During banburying, it can be adjusted automatically or manually according to the physical properties of the material. The hard material should not be too large or too large, otherwise it will crash or burn out the main motor.
6. After the material is mixed, lift the air pressure cover first, then turn the mixing tank over, pour out the material after it is in place, and then return the mixing tank to the original position, and then add material to mix the next material.
7. When stopping production, first turn off the power of each function, then turn off the power of the host, and finally quickly clean the mixing room and clean up the dust.
