The open mill is one of the main equipment of the rubber factory. The rubber mixing operation of the open mill is an accident-prone process, including personal accidents and equipment accidents.
In recent years, on the one hand, due to the rapid increase of rubber enterprises, especially the establishment of a large number of rural and township rubber enterprises, a large number of young workers without strict training have taken up rubber mixing jobs, and violations of safety operations are common. On the other hand, due to the continuous strengthening of the production capacity of the rubber mixing machine, and because some steel wire radial tires and wide-section tires require an increase in the hardness of the tread rubber, the lateral pressure of the rubber mixing machine increases, resulting in frequent damage to the safety sheet, and there are rollers. A barrel breakage accident occurred. Therefore, the safety status of rubber mixing operation is not optimistic
Protecting the safety and health of workers in production is an important policy in my country. Protecting national property and promoting production development is an important responsibility of enterprise management. Therefore, as far as rubber enterprises are concerned, attention should be paid to the safety of start-up operations.
Preparation
The rubber material should also be checked before feeding. If it is mixed with hard metal debris, it will be put into the rubber mixing machine with the rubber, which will cause the transverse pressure to suddenly increase, which will easily cause equipment damage.
Correct operation
First of all, adjust the roll distance to keep the balance of the roll distance. If the size of the adjustment of the roller distance at both ends is different, the roller will be eccentrically loaded, extremely
Fragile equipment, this is strictly prohibited.
After the work is completed, cut off the power supply and close the water and steam valves.
In addition to the above, also note:
When pulling and pushing the vehicle, pay attention to the surrounding conditions to prevent bumping and touching people, and prevent the heavy rollover from injuring people when loading.
